Amiga IO Peripherals

Algor & Algor Pro

> Company: E3B, Germany
> Date: 2003 & 2004
> Amiga: A2000, A3000, A4000
> Interface: Zorro II
> Autoconfig ID: ID2145 / 203

USB Interface
Three USB Connectors
Compatible With USB 1.1 And 2.0 Specifications (But Supports Only USB 1.1 Transfer Speeds)
All Ports Are Protected Against Overvoltage And Short Circuit
Integrated Power Management On Port By Port Base
Implements Most Of The USB Protocol Handling Completely In Hardware
Internally Operates Completely In 32 Bit
Shipped With A Full License Of The Poseidon USB Stack
Integrated 512 KB (Algor Pro: 1 MB) Flash ROM To Transparently Include The USB Stack Right After Cold Powerup, Boot Off USB Mass Storage Devices, Use USB Mice And Keyboards During Early Startup Menu And To Include System Patches Like Those From OS3.9
Algor Pro Can Transparently Compress The Flash ROM Contents, Increasing The Actual Capacity To Over 1.7 MB
38 Pin Expansion Header For The Ethernet Module Or For Serial/Parallel Port Expansions (HyperCom 3i)

Optional 10 Mbit Ethernet Module – Norway
Connects To The 38 Pin Expansion Connector
NE2000 Compatible Chip With Integrated 16 KB Buffer
RJ45 (10BaseT) Internal Connector
DB9 External Connector – A DB9 To RJ45 Adaptor Is Supplied
Network Status Display By Four LEDs
SANA II Driver

Requires At Least 68030 @ 25 MHz
Driver For USB Mouse And Keyboard (HID Devices), Parallel Interface (Printers) And Flash Card Readers (SCSI Emulation) Are Included


Amiga Algor & Algor Pro

Front: Algor & Algor Pro front view

No votes yet.
Please wait...