Amiga Video Peripherals

Sync Strainer

> Company: PreVue Technologies, USA
> Date: 1993
> Amiga: A2000, A3000, A4000
> Interface: RGB port
> Autoconfig ID: ID2129 / 9

Allows The Use Of Multisync Monitors While The Amiga Is In Genlock Mode
In Genlock Mode The Horizontal And Vertical Sync Signals Are Set To 7.8 KHz On The Amiga Video Port – These Signals Are Not Used By Single Scan Monitors, But Are Required For Multiscan Monitors
When The Sync Strainer Senses A Genlock Condition (As When The Video Toaster Is Started), It Creates New H- And V-Sync’S From Composite Sync
Acts As A Simple Buffer For H- And V-Sync When The Amiga Puts Out 15.7 KHz Or 31.4 KHz Horizontal Scan Rate
Automatically Switches Between The Various Scan Modes
Available With DB9 Or HD15 VGA Output Connectors
Works With Any Genlock Which Does Not Use The 23 Pin RGB Port
The Sync Strainer Is Not A Scandoubler, The Analog RGB Signal Is Passed Through Unchanged

No votes yet.
Please wait...