Amiga Storage Peripherals

BSC Tandem AT-Bus 2008

> Company: BSC / Alfa Data, Germany
Date: 1992
Amiga: 2000, 3000, 4000
Interface: Zorro 2
Autoconfig ID: 2049/6, 2092/6

IDE Controller
the board is basically the combination of the A.L.F. IDE controller and the MemoryMaster memory expansion cards
uses polled I/O, not DMA transfer
RDB compatible
40 pin internal IDE header
place for a 3.5″ hard disk on the card
delivered with A.L.F. 2 driver software
during transfers the high and low bytes are swapped as the A600/A1200/A4000 and PCs do so the drives formatted with them can be handled by the AT-Bus 2008
hard disk activity LED connector

sixteen ZIP sockets accept 8 MB RAM
supports either static column or page mode ZIPs
accepts ZIPs in groups of four giving 2, 4, 6 or 8 MB configurations
RAM and HD can be disabled separately by jumper


Amiga BSC Tandem AT-Bus 2008

Front: Amiga BSC Tandem AT-Bus 2008

No votes yet.
Please wait...